Getting started

Getting started with your terminal

1. Switch the D210e power on/off by pressing & holding the cancel/power button (X CANCEL) for 3 seconds. Check that is has full battery power by looking at the battery icon in the top right corner of the display screen.

2. If you need to charge your terminal, use the power cables supplied to plug into the side of the unit and into an appropriate mains power supply. If you have ordered a Base Station, place the terminal on it to charge. The Base Station must be connected to an appropriate power supply using the power cable supplied. The D210e terminal battery requires regular mains charging, much like a mobile phone. The battery charge can last up to 8 hours depending on frequency of use.

3. Lift printer cover flap to check the paper roll does not need to be replaced and is seated correctly in the printer well.

4. If you need to load a new paper roll ensure tongue of paper is feeding up from underneath the roll and close the lid firmly leaving tongue of paper sticking out above the cutting blade.

Default Password: 123456